Deutz-Fahr 07

Manual transmission fluid capacity & service interval

Deutz-Fahr 07 manual transmission fluid capacity ranges from 16 to 36 liters. Service intervals include checks at 500 hours and changes at 1000 hours or 12 months. The data covers 11 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
D 3607 (1985-1991)
  • Use: Normal
  • Capacity 16 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 8/2
D 4807 (1982-1984)
  • Use: Normal
  • Capacity 18 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 8/2
D 7007 (1982-1985)
  • Use: Normal
  • Capacity 36 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 12/4
D 4007 (1981-1984)
  • Use: Normal
  • Capacity 16 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 8/2
D 4507 (1981-1991)
  • Use: Normal
  • Capacity 16 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 8/2
D 5207 (1981-1985)
  • Use: Normal
  • Capacity 18 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 8/2
D 6207 (1981-1985)
  • Use: Normal
  • Capacity 18 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 8/2
D 6507 (1981-1985)
  • Use: Normal
  • Capacity 18 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 8/2
D 6807 (1981-1984)
  • Use: Normal
  • Capacity 36 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 12/4
D 7207 (1981-1985)
  • Use: Normal
  • Capacity 36 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 12/4
D 7807 (1981-1985)
  • Use: Normal
  • Capacity 36 liter
  • Check 500 hours
  • Change 1000 hours/ 12 months
  • Code: 12/4

Additional Notes

  • Across the Deutz-Fahr 07 series, transaxle manual transmission fluid capacities fall into three distinct groups: 16 liters, 18 liters, and 36 liters, reflecting meaningful differences in the physical size and design of the transmission assemblies across the model range.
  • The 16-liter capacity applies to the D 3607, D 4007, and D 4507, which represent the lower end of the series. In agricultural transaxle applications, a 16-liter fill is a moderate volume consistent with compact integrated transmission-axle housings.
  • The D 4807, D 5207, D 6207, and D 6507 each carry an 18-liter transaxle capacity, placing them in a mid-range group that requires slightly more fluid volume than the smaller-displacement models in the series.
  • The D 6807, D 7007, D 7207, and D 7807 share a 36-liter transaxle capacity, which is double the volume of the 18-liter group. A capacity of this magnitude in a transaxle housing typically indicates a larger, heavier-duty integrated unit designed to handle greater torque loads.
  • All eleven configurations share an identical check interval of every 500 hours. In hour-based service schedules common to agricultural equipment, 500-hour checks are used to monitor fluid condition and level between full drain-and-fill services.
  • The fluid change interval across all configurations is 1000 hours or 12 months, whichever comes first. The dual-trigger format means a machine with low annual operating hours would still require a fluid change on a calendar basis, preventing fluid degradation from extended time in service regardless of usage.
  • All specifications are listed under normal use conditions, meaning the 1000-hour/12-month change interval and 500-hour check interval apply to standard operating environments rather than elevated-stress or severe-duty conditions.
  • The D 4007 was produced only from 1981-1984, while the D 4507 spans the full 1981-1991 range of the series. Despite the difference in production periods, both share the same 16-liter capacity and identical service intervals.
  • The D 3607 entered production in 1985, making it the only model in the 16-liter group that was not available from the start of the 1981 model year coverage. Its capacity and service schedule are nonetheless identical to the earlier D 4007 and D 4507.

Other Systems