Claas Atos
Brake fluid capacity & service interval
Claas Atos brake fluid capacity is 1 liter. Service intervals include checking every 50 hours and changing every 24 months. The data covers 6 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Atos 220 (2015-2020) |
|
| Atos 230 (2015-2020) |
|
| Atos 240 (2015-2020) |
|
| Atos 330 (2015-2020) |
|
| Atos 340 (2015-2020) |
|
| Atos 350 (2015-2020) |
|
Additional Notes
- The Claas Atos brake fluid system is noted as a combined hydraulic brake and clutch system, meaning a single fluid reservoir serves both functions across all six variants in the 220, 230, 240, 330, 340, and 350 configurations.
- Every variant from 2015-2020 carries a uniform system capacity of 1 liter, which is consistent with a compact shared reservoir rather than a large dedicated brake circuit found in heavier machinery.
- The check interval is set at 50 operating hours under normal use conditions, a figure tied to engine hours rather than calendar time, which is standard practice for agricultural equipment where annual mileage is not a meaningful measure.
- The fluid change interval is 24 months under normal use conditions, reflecting the well-established tendency of glycol-based brake fluids to absorb moisture over time, which lowers the boiling point and reduces braking effectiveness regardless of operating hours accumulated.
- The 50-hour check interval and 24-month change interval operate as independent schedules, meaning whichever threshold is reached first would govern the required service action at a given point in operation.
- The capacity and service intervals are identical across the 220, 230, 240, 330, 340, and 350 variants for 2015-2020, indicating no differentiation in brake and clutch hydraulic system sizing between the lower and higher model numbers within the Atos range.