Case - IH 3200/4200

Differential fluid capacity & service interval

Case - IH 3200/4200 differential fluid capacity is 5 liters. Service intervals include checking every 200 hours and changing every 800 hours. The data covers 7 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 3210 (1990-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 800 hours
  • Code: (4x4)
  • 3220 (1990-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 800 hours
  • Code: (4x4)
  • 3230 (1990-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 800 hours
  • Code: (4x4)
  • 4210 (1990-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 800 hours
  • Code: (4x4)
  • 4220 (1990-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 800 hours
  • Code: (4x4)
  • 4230 (1990-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 800 hours
  • Code: (4x4)
  • 4240 (1990-1995)
  • Front
  • Use: Normal
  • Capacity 5 liter
  • Check 200 hours
  • Change 800 hours
  • Code: (4x4)

Additional Notes

  • All seven models in the Case-IH 3200/4200 series share an identical front differential fluid capacity of 5 liters, indicating a common front axle assembly across the 3210, 3220, 3230, 4210, 4220, 4230, and 4240 for the 1990-1995 model years.
  • The 5-liter capacity figure represents a service fill volume, which is the amount of fluid held during normal operation rather than a total system or overhaul fill that might account for residual fluid in passages or coolers.
  • Front differential fluid checks are specified at 200-hour intervals under normal use conditions, a frequency consistent with periodic inspection rather than fluid replacement, allowing for early detection of contamination or level loss between full change intervals.
  • The fluid change interval is set at 800 hours under normal use conditions, meaning a full drain and refill of the 5-liter front differential is performed once for every four inspection intervals.
  • The ratio of check interval to change interval across the 3200/4200 series front differential is 1:4, with checks at 200 hours and changes at 800 hours, a structure common in agricultural equipment where extended drain intervals are balanced against regular monitoring.
  • The specifications apply uniformly across both the 3200 and 4200 sub-series, with no variation in capacity, check interval, or change interval between the lighter 3210-3230 models and the heavier 4210-4240 models for the 1990-1995 production span.

Other Systems