Case - IH 2100

Differential fluid capacity & service interval

Case - IH 2100 differential fluid capacity is 2,5 liters. Service intervals include checking at 150 hours and changing at 1000 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • 2120 V & E (1990-1991)
  • Front
  • Use: Normal
  • Capacity 2,5 liter
  • Check 150 hours
  • Change 1000 hours
  • Code: (4x4)
  • 2130 V & E (1990-1991)
  • Front
  • Use: Normal
  • Capacity 2,5 liter
  • Check 150 hours
  • Change 1000 hours
  • Code: (4x4)
  • 2140 V & E (1990-1991)
  • Front
  • Use: Normal
  • Capacity 2,5 liter
  • Check 150 hours
  • Change 1000 hours
  • Code: (4x4)
  • 2150 V & E (1990-1991)
  • Front
  • Use: Normal
  • Capacity 2,5 liter
  • Check 150 hours
  • Change 1000 hours
  • Code: (4x4)

Additional Notes

  • Across all four variants in the Case - IH 2100 series covered here, the front differential fluid capacity is rated at 2.5 liters, which represents a service fill volume rather than a full overhaul or dry-fill figure.
  • The 2120 V & E front differential carries a check interval of every 150 hours under normal use conditions, meaning fluid level inspections are scheduled well ahead of any drain-and-fill service.
  • A change interval of 1,000 hours applies to the front differential on the 2130 V & E under normal use, placing full fluid replacement on a long-cycle maintenance schedule typical of agricultural equipment operating in predictable field conditions.
  • The 2140 V & E shares the same 150-hour check and 1,000-hour change intervals as the other variants in the series, with the 2.5-liter front differential capacity remaining consistent across the 1990-1991 model years.
  • On the 2150 V & E, the front differential fluid specifications are identical to the rest of the series, with a 2.5-liter capacity, a 150-hour check interval, and a 1,000-hour change interval, all under normal use conditions.
  • The ratio between the check interval and the change interval across all four variants is roughly 1:6.7, meaning fluid level is verified approximately six to seven times before a full fluid change is due.

Other Systems