Steyr S32

Transfer case fluid capacity & service interval

Steyr S32 transfer case fluid capacity is 4,5 liters. Service intervals include checks every 20000 km and changes every 40000 km or 12 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
19S32 (4x4) (1988-1996)
  • Use: Normal
  • Capacity 4,5 liter
  • Check 20000 km
  • Change 40000 km/ 12 months
  • Code: VG 1200
27S32 (6x6) (1988-1996)
  • Use: Normal
  • Capacity 4,5 liter
  • Code: VG 1200

Additional Notes

  • The Steyr S32 transfer case fluid capacity is 4.5 liters across both the 19S32 (4x4) and 27S32 (6x6) configurations, indicating a moderately sized transfer case unit consistent with the vehicle's commercial or utility-grade drivetrain.
  • The 19S32 (4x4) carries a fluid check interval of 20,000 km under normal use conditions, meaning the fluid level is inspected at that mileage point before the full change interval is reached.
  • Under normal use conditions, the 19S32 (4x4) transfer case fluid change interval is set at 40,000 km or 12 months, whichever comes first, reflecting a dual-trigger service schedule that accounts for both mileage and time-based fluid degradation.
  • The 12-month time-based change interval on the 19S32 (4x4) means that even low-mileage operation within a calendar year still requires a fluid change, which is typical for vehicles where fluid sits for extended periods and may absorb moisture or degrade chemically regardless of use.
  • Both the 4x4 and 6x6 variants of the 1988-1996 S32 share the same 4.5-liter transfer case fluid capacity, suggesting the transfer case unit itself is common across the two drivetrain configurations despite the difference in axle count.

Other Systems