Renault T series Euro 6 (EU)
Manual transmission fluid capacity & service interval
Renault T series Euro 6 (EU) manual transmission fluid capacity ranges from 13,5 to 14,3 liters. Service intervals include 200000 km or 36 months, 2500 hours, and 450000 km or 36 months. The data covers 23 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Additional Notes
- The Renault T series Euro 6 T 380 (4x2 / 6x2) Euro 6b manual transmission carries a standard fluid capacity of 13.5 liters, which represents the service fill volume for the transmission unit itself.
- When an additional power take-off (PTO) unit is fitted, the total fluid capacity rises to 14.3 liters, reflecting the extra volume required to lubricate the PTO assembly alongside the main transmission.
- Across the manual transmission with overdrive and both service category (SC) 2 and SC 4 configurations, the 13.5-liter and 14.3-liter capacity figures remain consistent, indicating no capacity variation between those transmission classifications on the T 380.
- For construction site use described as very hilly, with gross weights exceeding 80 tonnes and fuel consumption above 100 liters per 100 km, the change interval is expressed as 2500 hours rather than a distance or calendar figure, applying equally across the overdrive, SC 2, and SC 4 transmission notes.
- A 200,000 km or 36-month change interval applies to demanding long-distance and construction site conditions, including hilly terrain at 71-80 tonnes with fuel consumption at or below 100 liters per 100 km, and to routes where PTO use combined with idle time exceeds 25% of operation.
- The 450,000 km or 36-month interval is the longest change schedule listed and applies to the "all other conditions" use case across the overdrive, SC 2, and SC 4 transmission notes, as well as to SC 2 configurations covering flat or predominantly flat long-distance routes at or below 46 tonnes and distribution or regional use at or below 32 tonnes.
- In all cases where a distance-based interval is specified, a 36-month calendar limit accompanies the kilometer figure, meaning whichever threshold is reached first governs the service event regardless of mileage accumulated.
- The separation of use conditions into distinct rows for the manual with overdrive, SC 2, and SC 4 transmission notes reflects that service category classification is treated as an independent variable alongside terrain, weight, and fuel consumption when determining the applicable change interval.