Mack Titan series
Coolant capacity & service interval
Mack Titan series coolant capacity ranges from 53 to 62,5 liters. Service intervals consist of 12 and 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Titan MP10 EPA 10, TD7 (2011-2015) |
|
| Titan MP10 + DPF, TD7 (2010-2010) |
|
| Titan MP10 + DPF, TD7 (2010-2010) |
|
Additional Notes
- The Mack Titan series cooling system capacity varies by transmission type across the configurations listed. Automatic transmission fitments hold 62.5 liters, while manual transmission fitments hold 53 liters, a difference of 9.5 liters between the two.
- The 9.5-liter gap between automatic and manual transmission configurations reflects the additional cooling demands of an automatic transmission, which generates heat through its torque converter and hydraulic circuits and typically routes transmission fluid through a cooler integrated into the cooling circuit.
- For the MP10 + DPF, TD7 (2010) under normal use conditions, the coolant change interval is set at 24 months.
- The vocational use condition for the MP10 + DPF, TD7 (2010) carries a 12-month change interval, half the duration of the normal use interval. Vocational duty typically involves more demanding operating cycles such as frequent idling, stop-and-go operation, or heavy loading, which accelerate coolant degradation.
- The MP10 EPA 10, TD7 covering 2011-2015 shares the same 62.5-liter and 53-liter capacity figures as the 2010 MP10 + DPF, TD7 configuration, indicating no change in cooling system volume between those engine variants under normal use.