Iveco EuroTrakker MP Cursor 8 (6x4/6x6/8x4x4)

Transfer case fluid capacity & service interval

Iveco EuroTrakker MP Cursor 8 (6x4/6x6/8x4x4) requires 6,5 liters of transfer case fluid. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
EuroTrakker MP 260E35 Cursor 8 /W (6x6) (1998-2006)
  • Use: Normal
  • Capacity 6,5 liter
  • Code: TC 1800
EuroTrakker MP 380E35 Cursor 8 /W (6x6) (1998-2006)
  • Use: Normal
  • Capacity 6,5 liter
  • Code: TC 1800

Additional Notes

  • Both the EuroTrakker MP 260E35 Cursor 8 /W (6x6) and the MP 380E35 Cursor 8 /W (6x6), covering model years 1998-2006, share an identical transfer case fluid capacity of 6.5 liters.
  • A transfer case capacity of 6.5 liters is consistent with a heavy-duty multi-axle drivetrain, where the unit must distribute torque across multiple driven axles and requires a proportionally larger fluid volume to maintain lubrication under load.
  • The 6.5-liter figure represents a service fill capacity, meaning the volume associated with routine fluid maintenance rather than a full overhaul or dry-fill scenario, which would typically account for residual fluid retained in internal passages and components.
  • The use condition recorded for both configurations is normal, meaning the 6.5-liter capacity specification applies under standard operating conditions rather than severe-duty cycles such as sustained off-road use, extreme temperatures, or heavy towing.
  • The Iveco EuroTrakker MP Cursor 8 in 6x6 configuration carries the same 6.5-liter transfer case specification across both the 260E35 and 380E35 variants, indicating the transfer case unit is shared between these two power output ratings despite their differing engine outputs.

Other Systems