Hino Profia / 700 series Euro 4

Manual transmission fluid capacity & service interval

Hino Profia / 700 series Euro 4 uses manual transmission fluid with a capacity range of 10 to 13 liters. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
72041 Euro 4 4x2, SH1EEKA (2004- )
  • Use: Normal
  • Capacity 13 liter
  • Code: Eaton RTLO 16918 B 18/2
72041 Euro 4 4x2, SH1EEKA (2004- )
  • Use: Normal
  • Capacity 10 liter
  • Capacity 10,5 liter (+ PTO)
  • Code: ZF 16S-151 16/2
72841/72845/73241 Euro 4 6x4/8x4, FY1EUKA/SS1EKKA/FS1ETKA/FS1ERKA/FY1ETKD/FY1ETKM (2004- )
  • Use: Normal
  • Capacity 13 liter
  • Code: Eaton RTLO 16918 B 18/2
72841/72845/73241 Euro 4 6x4/8x4, FY1EUKA/SS1EKKA/FS1ETKA/FS1ERKA/FY1ETKD/FY1ETKM (2004- )
  • Use: Normal
  • Capacity 10 liter
  • Capacity 10,5 liter (+ PTO)
  • Code: ZF 16S-151 16/2

Additional Notes

  • The Hino Profia / 700 series Euro 4 manual transmission specifications list two distinct capacity values across configurations: 13 liters and either 10 liters or 10.5 liters, indicating that more than one transmission unit type is covered within the same model range.
  • The 10.5-liter capacity figure applies specifically to installations equipped with a Power Take-Off (PTO) unit, which adds a small but measurable volume to the standard 10-liter fill requirement.
  • The 13-liter capacity represents the larger of the two transmission fill volumes listed and applies under normal use conditions across both the 4x2 and the 6x4/8x4 drivetrain configurations starting from 2004.
  • The 72041 Euro 4 4x2 configuration, covering chassis code SH1EEKA, carries the same dual-capacity structure (10 liters standard, 10.5 liters with PTO, and 13 liters for the alternate unit) as the heavier multi-axle variants.
  • The 72841, 72845, and 73241 Euro 4 variants spanning 6x4 and 8x4 axle arrangements share identical manual transmission fluid capacity specifications with the lighter 4x2 72041 configuration, despite the difference in drivetrain layout and chassis codes such as FY1EUKA, SS1EKKA, FS1ETKA, FS1ERKA, FY1ETKD, and FY1ETKM.
  • All four specification rows are assigned a normal use condition, meaning none of the listed capacities are tied to a severe-duty or first-change-only service scenario.

Other Systems