Foden 2000

Manual transmission fluid capacity & service interval

The Foden 2000 manual transmission fluid capacity ranges from 7.5 to 8.5 liters. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
2000 S104, 6BTA (1990-1996)
  • Use: Normal
  • Capacity 7,5 liter
  • Code: Eaton 4106 A 6/1
2000 S104, 6BTA (1990-1996)
  • Use: Normal
  • Capacity 8,5 liter
  • Code: Eaton 6109 9/1
2000 S104, 6BTA (1990-1996)
  • Use: Normal
  • Capacity 7,5 liter
  • Code: ZF 6/1
2000 S104, Phaser 210Ti (1990-1996)
  • Use: Normal
  • Capacity 7,5 liter
  • Code: Eaton 4106 A 6/1
2000 S104, Phaser 210Ti (1990-1996)
  • Use: Normal
  • Capacity 8,5 liter
  • Code: Eaton 6109 9/1
2000 S104, Phaser 210Ti (1990-1996)
  • Use: Normal
  • Capacity 7,5 liter
  • Code: ZF 6/1

Additional Notes

  • The Foden 2000 S104 with the 6BTA engine, covering model years 1990-1996, carries multiple manual transmission fluid capacity figures: 7.5 liters and 8.5 liters. The presence of two distinct values for the same engine configuration typically reflects different gearbox variants fitted to the same vehicle line.
  • The 8.5-liter capacity figure listed for the 2000 S104 with the 6BTA engine represents the larger of the two capacities on record, suggesting a physically larger or differently specified gearbox unit compared to the 7.5-liter alternative.
  • The 7.5-liter capacity appears twice within the 6BTA configuration for 1990-1996, which in fluid specification tables generally indicates separate fill points or distinct service contexts, such as a drain-and-refill service volume versus a total system capacity.
  • The 2000 S104 fitted with the Phaser 210Ti engine across 1990-1996 mirrors the same three-capacity pattern seen in the 6BTA variant: two entries at 7.5 liters and one at 8.5 liters, indicating parallel gearbox fitment options across both engine types.
  • All listed manual transmission fluid capacities across both the 6BTA and Phaser 210Ti configurations are specified under normal use conditions, meaning the stated volumes apply to standard operating environments rather than severe-duty cycles.
  • The 8.5-liter figure shared between the 6BTA and Phaser 210Ti variants of the 2000 S104 points to a common gearbox option available regardless of engine choice within the 1990-1996 production span.

Other Systems