BMC Belde

Automatic transmission fluid capacity & service interval

BMC Belde automatic transmission fluid capacity is 30 liters. Service intervals consist of checks every 10000 km or 3 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Belde 260 CD Euro 3 (2006- )
  • Use: Normal
  • Capacity 30 liter (Initial fill)
  • Check 10000 km/ 3 months
  • Code: ZF 5HP502C 5/1
Belde 260 SLF Euro 3 (2006- )
  • Use: Normal
  • Capacity 30 liter (Initial fill)
  • Check 10000 km/ 3 months
  • Code: ZF 5HP502C 5/1

Additional Notes

  • Both the Belde 260 CD Euro 3 and the Belde 260 SLF Euro 3 share an identical automatic transmission fluid capacity of 30 liters, designated as an initial fill figure.
  • An initial fill capacity represents the total fluid volume required when the transmission is filled from a dry or overhauled state, rather than the smaller top-up volume used during a routine service.
  • A 30-liter initial fill is a notably large capacity, consistent with the heavy-duty automatic transmissions found in commercial vehicles of the Belde's class.
  • The BMC Belde specifications place both the 260 CD Euro 3 and the 260 SLF Euro 3 variants under a normal use condition, meaning the stated check interval applies to standard operating circumstances rather than severe or demanding duty cycles.
  • The automatic transmission fluid check interval for both variants is set at 10,000 km or 3 months, whichever comes first, indicating a time-based threshold alongside the distance-based one.
  • The dual-trigger interval structure, combining a kilometer figure with a calendar period, accounts for vehicles that accumulate low mileage over time, ensuring fluid condition is still assessed within a fixed time window regardless of distance traveled.