Yamaha YFS Blaster (USA)

Brake fluid capacity & service interval

Yamaha YFS Blaster (USA) uses brake fluid with a capacity range between min and max. The data covers 1 configuration.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
YFS 200 Blaster (1998-2006)
  • Use: Normal
  • Between min and max.

Additional Notes

  • The Yamaha YFS Blaster (USA) uses a hydraulic brake system, and the brake fluid specification for the YFS 200 Blaster covering 1998-2006 is expressed as a fill level rather than a fixed volume, with the correct level falling between the minimum and maximum marks on the reservoir.
  • A between-min-and-max specification is standard for hydraulic brake fluid reservoirs, where the fluid level is checked visually against reference marks rather than measured in liters or milliliters, reflecting the closed nature of a hydraulic circuit that does not consume fluid under normal operation.
  • The use condition listed for the 1998-2006 YFS 200 Blaster brake fluid is normal, meaning the level specification applies under standard operating conditions rather than a separate severe-use or first-change interval.