Yamaha XT

Clutch fluid capacity & service interval

Yamaha XT clutch fluid capacity ranges between min and max. Service intervals include 1000 km, 10000 km, and 24 months. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
XT1200 Z Super Ténéré (2017-2022)
  • Use: Normal
  • Between min and max.
  • Check 10000 km
  • Change 24 months
XT1200 Z Super Ténéré (2017-2022)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km
XT1200 Z Super Ténéré (2014-2017)
  • Use: Normal
  • Between min and max.
  • Check 10000 km
  • Change 24 months
XT1200 Z Super Ténéré (2014-2017)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km
XT1200 Z Super Ténéré (2010-2013)
  • Use: Normal
  • Between min and max.
  • Check 10000 km
  • Change 24 months
XT1200 Z Super Ténéré (2010-2013)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km

Additional Notes

  • The Yamaha XT1200 Z Super Ténéré runs a hydraulic clutch system across all three generation spans covered in the specifications: 2010-2013, 2014-2017, and 2017-2022.
  • Rather than a fixed fill volume, the clutch fluid level specification calls for a reading between the minimum and maximum marks on the reservoir, which is the standard method for hydraulic fluid systems where the reservoir acts as the reference point.
  • Under normal use conditions, the clutch fluid inspection interval is set at every 10,000 km across all three generation spans.
  • The change interval under normal use is time-based at 24 months, applying consistently across the 2010-2013, 2014-2017, and 2017-2022 configurations, independent of distance traveled.
  • An initial service check is specified at 1,000 km for all three generation spans, which is a break-in inspection interval intended to catch early fluid contamination or level changes before the standard 10,000 km cycle begins.
  • The initial service entry carries no fluid change interval, only a level check at 1,000 km, while the 24-month change interval belongs exclusively to the normal use condition rows.

Other Systems