Yamaha T 110 Crypton
Brake fluid capacity & service interval
Yamaha T 110 Crypton requires brake fluid with a capacity range between min and max. Service intervals include checking at 12 months or 1000 km, and changing at 6000 km or 1000 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
|
|
|
|
|
|
|
|
Additional Notes
- The Yamaha T 110 Crypton front hydraulic brake system carries no fixed volume figure in the specifications. The stated capacity reference is a level range, expressed as between the minimum and maximum marks on the reservoir, which is characteristic of a top-up or level-check service rather than a full fluid replacement volume.
- Under normal use conditions, the front hydraulic brake system on both the KE14 and UE0 variants shares the same change interval of 6000 km, indicating a consistent replacement schedule across the two configurations for 2011-2015.
- The normal use condition also carries a periodic inspection interval of every 12 months, meaning the fluid level is subject to a time-based check independent of distance traveled.
- The KE14 variant specifies a check at 1000 km under initial service conditions, whereas the UE0 variant specifies a change at 1000 km under the same initial service condition. The distinction between a check and a change at that early interval represents a notable difference between the two configurations.
- The initial service interval of 1000 km on both variants applies only to the front hydraulic brake system and does not carry the 12-month time-based inspection requirement that appears under normal use conditions.