Vespa PX

Brake fluid capacity & service interval

Vespa PX brake fluid capacity ranges between min and max. Service intervals include checks at 5000 km/12 months or 1000 km/4 months, and changes at 10000 km/24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
PX 125 Euro 2 (2007-2017)
  • Use: Normal
  • Between min and max.
  • Check 5000 km/ 12 months
  • Change 10000 km/ 24 months
PX 125 Euro 2 (2007-2017)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km/ 4 months
PX 150 Euro 2 / USA (2005-2017)
  • Use: Normal
  • Between min and max.
  • Check 5000 km/ 12 months
  • Change 10000 km/ 24 months
PX 150 Euro 2 / USA (2005-2017)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km/ 4 months

Additional Notes

  • The Vespa PX brake fluid specifications apply to a hydraulic brake system, meaning the fluid operates under pressure to actuate the brakes rather than through a mechanical cable arrangement.
  • Both the PX 125 Euro 2 and PX 150 Euro 2 / USA share identical service intervals under normal use conditions, with a check interval of every 5,000 km or 12 months and a full fluid change at every 10,000 km or 24 months.
  • The PX 125 Euro 2 carries a model year range starting from 2007, while the PX 150 Euro 2 / USA has a starting year of 2005, placing the 150 variant in production two years earlier within the specifications provided.
  • Under initial service conditions, both the PX 125 Euro 2 and PX 150 Euro 2 / USA require a brake fluid check at 1,000 km or 4 months, which is a significantly shorter interval than the 5,000 km or 12-month check applied under normal use.
  • The initial service check interval of 1,000 km or 4 months does not include a fluid change specification, only a level inspection, distinguishing it from the normal use schedule which carries both check and change intervals.
  • The fluid level specification for all listed configurations is expressed as a range between a minimum and maximum mark rather than a fixed volume, which is standard for hydraulic reservoir-based systems where level is verified visually rather than by measured fill quantity.
  • The time-based component of the normal change interval is 24 months, meaning a fluid change is due at 10,000 km or two years, whichever comes first, regardless of whether the distance threshold has been reached.

Other Systems