Tomos Nitro
Brake fluid capacity & service interval
Tomos Nitro uses brake fluid with a capacity range between minimum and maximum values. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Nitro 125 (2009-2019) |
|
| Nitro 50 (2009-2019) |
|
Additional Notes
- Both the Nitro 125 and Nitro 50 configurations covering 2009-2019 are equipped with a hydraulic brake system, meaning brake fluid is contained within a sealed hydraulic circuit rather than a mechanical cable arrangement.
- The brake fluid specification for the Nitro 125 (2009-2019) is expressed as a fill level falling between the reservoir's minimum and maximum markers, which reflects a level-based service standard rather than a fixed volumetric capacity.
- The Nitro 50 (2009-2019) shares the same between-min-and-max fill standard, indicating both displacement variants use an equivalent reservoir-level approach to brake fluid servicing under normal use conditions.
- A between-min-and-max specification means the reservoir must never be allowed to drop to or below the lower marker, as that threshold typically signals fluid loss or excessive brake pad wear in a hydraulic system.
- Both configurations carry a normal use condition designation, meaning the stated fill level applies to standard operating circumstances rather than a modified interval tied to severe or demanding riding conditions.