SYM Allo
Brake fluid capacity & service interval
SYM Allo uses brake fluid with a capacity range between min and max. Service intervals occur every 1000 km or 1 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Allo 50 E4 (2017-2021) |
|
| Allo 125 (2010-2017) |
|
| Allo 50 (2010-2017) |
|
Additional Notes
- The SYM Allo 125 (2010-2017) hydraulic brake system specifies a brake fluid level maintained between the minimum and maximum marks, with a check interval of every 1,000 km or 1 month under normal use conditions.
- The combined distance and time interval on the Allo 125 means whichever threshold arrives first triggers the fluid level check, a standard practice for safety-critical hydraulic systems.
- The Allo 50 (2010-2017) and Allo 50 E4 (2017-2021) both specify brake fluid maintained between the minimum and maximum marks under normal use, without a stated check interval in the specifications.
- Across all three configurations, the brake fluid specification is expressed as a level range rather than a fixed volume, which is characteristic of reservoir-based hydraulic brake systems where fluid is monitored by sight rather than measured by capacity.
- The Allo 50 and Allo 50 E4 share the same level-based brake fluid specification despite spanning different model year ranges, with the E4 designation on the later variant reflecting Euro 4 emissions compliance rather than a change in brake system requirements.