Sachs XTC

Brake fluid capacity & service interval

Sachs XTC uses brake fluid. Service intervals include checking at 1000 km or 4000 km and changing at 24000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
XTC 125 (2003-2004)
  • Use: Normal
  • Between min and max.
  • Check 4000 km
  • Change 24000 km/ 24 months
XTC 125 (2003-2004)
  • Use: First change only
  • Between min and max.
  • Check 1000 km

Additional Notes

  • The Sachs XTC 125 hydraulic brake system does not specify a fixed fluid volume. Instead, the fill level is defined as the range between the minimum and maximum marks on the reservoir.
  • Under normal use conditions, the brake fluid inspection interval is set at every 4,000 km.
  • The normal use change interval extends to 24,000 km or 24 months, whichever comes first, combining both a distance and a time-based threshold.
  • A separate first-change-only condition is listed, which carries an earlier inspection point at 1,000 km, reflecting the break-in period of a new hydraulic brake system.
  • The first-change-only entry does not carry a replacement interval of its own, as the 1,000 km figure applies solely to an initial inspection rather than a scheduled fluid exchange.