Rieju Spike
Brake fluid capacity & service interval
The Rieju Spike uses brake fluid with a capacity range between minimum and maximum values. The data covers 3 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Spike 50 (2012-2012) |
|
| Spike 50 (2003-2011) |
|
| Spike X 50 (2003-2011) |
|
Additional Notes
- All three configurations of the Rieju Spike listed in the specifications share the same brake fluid fill guidance: the level is to be maintained between the minimum and maximum marks on the reservoir.
- The Spike 50 appears across two separate specification entries, one covering 2003-2011 and another covering 2012, each carrying identical fill guidance for the hydraulic brake system.
- The Spike X 50, spanning 2003-2011, mirrors the standard Spike 50 brake fluid specification exactly, with no deviation in fill range guidance between the two variants.
- A min-to-max fill range, rather than a precise volume figure, is characteristic of brake fluid reservoir servicing, where the fluid level is checked visually against reservoir markings rather than measured by quantity.
- All entries are designated for normal use conditions, meaning the specifications apply to standard operating environments rather than severe or demanding service scenarios.
- The hydraulic brake system note present across all rows confirms the specifications apply to a fluid-actuated braking setup, as opposed to a purely mechanical cable-operated system.