Rieju MRX
Brake fluid capacity & service interval
The Rieju MRX uses brake fluid with a capacity range indicated as between minimum and maximum values. The data covers three configurations of the model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| MRX (2005-2010) |
|
| MRX 125 (2005-2010) |
|
| MRX Pro (2005-2010) |
|
Additional Notes
- All three configurations in the MRX lineup for 2005-2010 share the same brake fluid specification format, with the correct level described as sitting between the minimum and maximum marks on the reservoir.
- The Rieju MRX brake fluid specification applies to a hydraulic brake system, meaning fluid level is maintained within a reservoir rather than measured by a fill volume in milliliters or ounces.
- A "between min and max" specification is standard for hydraulic brake reservoirs, where the fluid level drops gradually as brake pads wear and the caliper pistons extend further outward.
- The MRX, MRX 125, and MRX Pro all carry the same use condition of normal for brake fluid level checks, meaning no separate severe-use interval or first-change-only distinction is listed for any of the three variants.