Rieju MR

Clutch fluid capacity & service interval

Rieju MR clutch fluid capacity ranges between min and max. Service intervals require a change every 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
MR 200 (2020- )
  • Use: Normal
  • Between min and max.
  • Change 24 months
MR 250 (2020- )
  • Use: Normal
  • Between min and max.
  • Change 24 months
MR 300 (2020- )
  • Use: Normal
  • Between min and max.
  • Change 24 months

Additional Notes

  • The Rieju MR 200, MR 250, and MR 300 all share an identical clutch fluid service interval of 24 months under normal use conditions.
  • Rather than a fixed volume figure, the fill specification across all three variants calls for fluid to be maintained between the minimum and maximum marks on the reservoir, which is the standard method for hydraulic clutch systems where the correct level is determined by sight rather than a measured quantity.
  • All three displacement variants carry a hydraulic clutch system, meaning clutch actuation is fluid-operated rather than cable-driven, and the fluid condition directly affects engagement feel and reliability over time.
  • The 24-month change interval applies regardless of displacement, so the MR 200, MR 250, and MR 300 follow the same time-based maintenance schedule for clutch fluid rather than a mileage-based one.

Other Systems