Polaris All-terrain pickup (ATP)

Brake fluid capacity & service interval

Polaris All-terrain pickup (ATP) requires brake fluid with a capacity range between min and max. Service intervals occur every 24 months or 200 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
ATP 330 4x4 (2005-2006)
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
ATP 500 4x4 (2005-2006)
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
ATP 330 4x4 (2004-2005)
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours
ATP 500 4x4 (2004-2005)
  • Use: Normal
  • Between min and max.
  • Change 24 months/ 200 hours

Additional Notes

  • The Polaris ATP brake fluid specification applies to the hydraulic brake system across all listed 330 and 500 engine configurations.
  • Rather than a fixed fill volume, the brake fluid level is defined by a min-to-max range within the reservoir, which is standard practice for hydraulic brake systems where fluid level is monitored rather than measured by quantity.
  • The change interval is set at 24 months or 200 hours, whichever comes first, under normal use conditions. The dual-trigger format accounts for both calendar time and operational hours, recognizing that brake fluid degrades through moisture absorption over time regardless of usage.
  • The 330 and 500 engine variants share identical brake fluid service intervals and level specifications, indicating no differentiation in brake system servicing requirements between the two displacement sizes.
  • The ATP 330 4x4 and ATP 500 4x4 each span two overlapping model year windows within the 2004-2006 range, with both the 2004-2005 and 2005-2006 configurations carrying the same 24-month/200-hour change interval.

Other Systems