PGO PA
Brake fluid capacity & service interval
PGO PA brake fluid capacity ranges between min and max. Service intervals include checks at 5000 km, 500 km or 1 month, and fluid changes every 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| PA 100 (2006- ) |
|
| PA 100 (2006- ) |
|
| PA 125 (2006- ) |
|
| PA 125 (2006- ) |
|
Additional Notes
- The PGO PA hydraulic brake system does not specify a discrete fluid volume. Instead, the fill level is defined as between the minimum and maximum marks on the reservoir, which is standard practice for brake fluid systems where level inspection replaces volumetric measurement.
- Under normal use conditions, the PA 100 and PA 125 share identical brake fluid service intervals: a level check every 5,000 km and a full fluid change every 24 months.
- The 24-month change interval reflects the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time and lowers its boiling point regardless of distance traveled.
- An initial service check interval of 500 km or 1 month applies to both the PA 100 and PA 125, representing an early inspection period following new vehicle break-in rather than a routine maintenance cycle.
- The initial service check interval is notably shorter than the normal 5,000 km check interval, indicating a tighter early-life inspection window for the hydraulic brake system on both variants.
- Both the PA 100 and PA 125 carry a starting year of 2006 and share identical brake fluid specifications across both use conditions, meaning no variation in brake system service requirements exists between the two engine displacement variants.