Peugeot Ludix

Brake fluid capacity & service interval

Peugeot Ludix uses brake fluid with a capacity range of min to max. Service intervals require a change every 24 months. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Ludix (2010-2019)
  • Use: Normal
  • Between min and max.
  • Change 24 months
Ludix 4T (2010-2019)
  • Use: Normal
  • Between min and max.
  • Change 24 months
Ludix Blaster LC (2010-2020)
  • Use: Normal
  • Between min and max.
  • Change 24 months
Ludix (2004-2009)
  • Use: Normal
  • Between min and max.

Additional Notes

  • The Peugeot Ludix brake fluid specification applies to a hydraulic brake system across all listed configurations, meaning the fluid operates under pressure to actuate the braking mechanism rather than through a mechanical cable arrangement.
  • For the 2004-2009 Ludix, the specification states only that the fluid level should be maintained between the minimum and maximum reservoir marks, with no change interval listed for that period.
  • From 2010 onward, a 24-month change interval appears across the Ludix, Ludix 4T, and Ludix Blaster LC configurations, alongside the same min-to-max level requirement.
  • A 24-month brake fluid change interval reflects the hygroscopic nature of brake fluid, which absorbs moisture over time and lowers its boiling point, reducing braking effectiveness regardless of mileage.
  • The Ludix 4T designation indicates a four-stroke engine variant, distinguishing the powertrain from the standard Ludix while sharing the same hydraulic brake fluid specification and 24-month change interval for 2010-2019.
  • The Ludix Blaster LC designation refers to a liquid-cooled engine variant, and the specification for 2010-2020 aligns with the same brake fluid level and 24-month interval as the other configurations in that period.
  • The "between min and max" capacity specification is a reservoir-level reference rather than a fixed volume, meaning the correct fill quantity is determined by the reservoir markings rather than a measured amount in liters or milliliters.