Peugeot Jetforce

Brake fluid capacity & service interval

Peugeot Jetforce requires brake fluid. Service intervals include checks at 500 km/1 month, 2500 km/6 months, and 5000 km/12 months, with changes at 10000 km and 20000 km. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Jetforce 125 (2007-2013)
  • Use: Normal
  • Between min and max.
  • Check 5000 km/ 12 months
  • Change 20000 km
Jetforce 125 (2007-2013)
  • Use: Initial service
  • Between min and max.
  • Check 500 km/ 1 months
Jetforce 125 (2007-2013)
  • Use: Severe
  • Between min and max.
  • Check 2500 km/ 6 months
  • Change 10000 km
Jetforce 50 (2007-2013)
  • Use: Normal
  • Between min and max.
  • Check 5000 km/ 12 months
  • Change 20000 km
Jetforce 50 (2007-2013)
  • Use: Initial service
  • Between min and max.
  • Check 500 km/ 1 months
Jetforce 50 (2007-2013)
  • Use: Severe
  • Between min and max.
  • Check 2500 km/ 6 months
  • Change 10000 km

Additional Notes

  • The Peugeot Jetforce brake fluid level is expressed as a range between a minimum and maximum mark rather than a fixed volume, which is standard for hydraulic brake systems where the reservoir level is monitored rather than measured by fill quantity.
  • Under normal use conditions, the Jetforce 125 and Jetforce 50 share identical brake fluid service intervals: a level check every 5000 km or 12 months, and a full fluid change every 20000 km.
  • The initial service interval for both the Jetforce 125 and Jetforce 50 calls for a brake fluid level check at 500 km or 1 month, which is considerably earlier than the recurring normal-use check interval of 5000 km or 12 months.
  • Under severe use conditions, the check interval for both variants tightens to every 2500 km or 6 months, exactly half the frequency of the normal-use schedule.
  • The change interval under severe conditions is set at 10000 km for both the Jetforce 125 and Jetforce 50, which is half the 20000 km change interval specified under normal use.
  • No fluid change interval is listed for the initial service condition on either variant; only a level check at 500 km or 1 month is specified for that stage.
  • The 50 cc and 125 cc engine variants carry identical brake fluid specifications across all three use conditions, indicating no displacement-related differentiation in the hydraulic brake service schedule for the 2007-2013 model range.

Other Systems