Peugeot Citystar, H4A

Coolant capacity & service interval

Peugeot Citystar and H4A models require 1,3 liters of coolant. The service interval for coolant replacement is 60 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Citystar 125 Euro 4, H4ADAA (2017-2020)
  • Use: Normal
  • Capacity 1,3 liter
  • Change 60 months
Citystar 125, H4ABAA (2012-2018)
  • Use: Normal
  • Capacity 1,3 liter
  • Change 60 months
Citystar 200, H4ACAA (2012-2020)
  • Use: Normal
  • Capacity 1,3 liter
  • Change 60 months

Additional Notes

  • All three configurations of the Peugeot Citystar H4A share an identical cooling system capacity of 1.3 liters, regardless of engine displacement or Euro emission standard.
  • A 1.3-liter cooling system capacity is a relatively modest figure, consistent with the small-displacement liquid-cooled single-cylinder engines typical of 125cc and 200cc scooters in the Citystar class.
  • The coolant change interval is set at 60 months across all listed configurations, meaning coolant is replaced on a five-year cycle under normal use conditions.
  • The 60-month interval under normal use reflects the degradation rate of coolant additives over time rather than mileage, which is a common approach for low-annual-mileage vehicles such as urban scooters.
  • The Citystar 125 Euro 4 variant, designated H4ADAA and covering 2017-2020, carries the same 1.3-liter capacity and 60-month interval as the earlier H4ABAA variant, indicating no cooling system revision accompanied the Euro 4 compliance update.
  • The H4ABAA variant spans 2012-2018, while the H4ACAA 200cc variant spans 2012-2020, and both share the 1.3-liter capacity, confirming the 125cc and 200cc engines use the same cooling system volume.

Other Systems