Microcar Cargo
Brake fluid capacity & service interval
Microcar Cargo brake fluid capacity ranges between min and max values. Service intervals consist of 50000 km/36 months and 30000 km/36 months. Data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Cargo 440 DCi (2009- ) |
|
| Cargo 505 Progress (2009- ) |
|
Additional Notes
- The Microcar Cargo brake fluid level specification is expressed as a range rather than a fixed volume, with the accepted fill sitting between the minimum and maximum marks on the reservoir. A "between min and max" designation is typical for hydraulic brake systems where the fluid level is checked visually against reservoir markings rather than measured by volume.
- The Cargo 440 DCi hydraulic brake system carries a change interval of 50,000 km or 36 months under normal use conditions, whichever comes first.
- The Cargo 505 Progress hydraulic brake system specifies a change interval of 30,000 km or 36 months under normal use conditions, placing the distance threshold notably lower than the 440 DCi despite sharing the same 36-month time limit.
- Both configurations share the 36-month time-based interval, meaning the calendar limit applies equally regardless of the difference in distance thresholds between the two variants.
- The distance-based interval gap between the two configurations is 20,000 km, with the 505 Progress reaching the service threshold sooner in terms of mileage while the time component remains aligned across both.