Mahindra Roxor

Differential fluid capacity & service interval

Mahindra Roxor differential fluid capacity is 1,8 liters. Service intervals occur at 15000 km, 36 months, or 300 hours. The data covers 4 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
  • Roxor HD 2.7 (2023- )
  • Front
  • Use: Normal
  • Capacity 1,8 liter
  • Change 15000 km/ 36 months/ 300 hours
  • Roxor HD 2.7 (2023- )
  • Rear
  • Use: Normal
  • Capacity 1,8 liter
  • Change 15000 km/ 36 months/ 300 hours
  • Roxor 2.5 (2018- )
  • Front
  • Use: Normal
  • Capacity 1,8 liter
  • Change 15000 km/ 36 months/ 300 hours
  • Roxor 2.5 (2018- )
  • Rear
  • Use: Normal
  • Capacity 1,8 liter
  • Change 15000 km/ 36 months/ 300 hours

Additional Notes

  • The Mahindra Roxor 2.5 carries a front differential fluid capacity of 1.8 liters, and the rear differential matches that figure exactly, also at 1.8 liters.
  • A 1.8-liter capacity per differential is consistent with a service fill level, meaning the housing is drained and refilled during routine maintenance rather than requiring a full overhaul quantity.
  • The Roxor HD 2.7 front and rear differentials each share the same 1.8-liter capacity as the 2.5 variant, indicating no change in differential housing size between the two engine configurations.
  • Under normal use conditions, the change interval for all four differential positions across both configurations is set at 15,000 km, 36 months, or 300 hours, whichever comes first.
  • The inclusion of an hour-based threshold of 300 hours alongside the distance and time intervals reflects the off-road and low-speed working nature of the Roxor, where engine hours can accumulate without covering significant mileage.
  • The 36-month time-based interval means that even with minimal operation, a fluid change is due within three years regardless of distance or hours logged.
  • All four differential positions, front and rear on both the 2.5 and the HD 2.7, share identical capacity and interval specifications, meaning a single service procedure applies uniformly across both axles on either configuration.

Other Systems