LML Stella

Brake fluid capacity & service interval

LML Stella brake fluid capacity is between min and max. Service intervals include checks at 1000 km or 4 months and 5000 km or 12 months, with changes at 10000 km or 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Stella 2T (2007-2017)
  • Use: Normal
  • Between min and max.
  • Check 5000 km/ 12 months
  • Change 10000 km/ 24 months
Stella 2T (2007-2017)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km/ 4 months

Additional Notes

  • The LML Stella 2T hydraulic brake system does not specify a fixed fluid volume. Instead, the fill level is defined by a min-to-max range, which is a common approach for brake fluid reservoirs where the acceptable level sits between two marked indicators rather than a precise measured quantity.
  • Under normal use conditions, brake fluid on the Stella 2T is subject to two distinct service actions: a check interval of every 5,000 km or 12 months, and a change interval of every 10,000 km or 24 months, whichever comes first.
  • An initial service check interval of 1,000 km or 4 months applies to the Stella 2T hydraulic brake system, which is a shorter interval than the normal-use check schedule and reflects the break-in period common to new or freshly serviced brake systems.
  • The initial service entry for the Stella 2T lists only a check action, with no corresponding fluid change interval, distinguishing it from the normal-use schedule that includes both check and change intervals.
  • The 2007-2017 span covers the full range of years listed for the Stella 2T, and the same brake fluid level specification and service intervals apply uniformly across all years in that range without variation by model year.

Other Systems