Ligier IXO

Brake fluid capacity & service interval

Ligier IXO uses brake fluid with a capacity range between min and max. Service intervals include 50000 km/36 months and 30000 km/36 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
IXO 440 DCi (2010- )
  • Use: Normal
  • Between min and max.
  • Change 50000 km/ 36 months
IXO 492 DCi (2010- )
  • Use: Normal
  • Between min and max.
  • Change 30000 km/ 36 months
IXO 505 Progress (2010- )
  • Use: Normal
  • Between min and max.
  • Change 30000 km/ 36 months

Additional Notes

  • The Ligier IXO brake fluid level is maintained between the reservoir's minimum and maximum marks across all three engine variants, which is the standard fill method for hydraulic brake systems rather than a measured volume overhaul fill.
  • The IXO 440 DCi carries a change interval of 50,000 km or 36 months under normal use conditions, a notably longer distance interval compared to the other two variants in the same lineup.
  • Both the IXO 492 DCi and the IXO 505 Progress share a change interval of 30,000 km or 36 months under normal use conditions, placing them on a shorter distance-based schedule than the 440 DCi despite sharing the same 36-month time limit.
  • The 36-month time-based interval is consistent across all three IXO variants regardless of engine type, meaning the calendar limit applies uniformly even when the kilometer thresholds differ between configurations.
  • All three variants specify the hydraulic brake system as the applicable component, confirming the intervals and fill guidance apply to the main braking circuit rather than any auxiliary or clutch hydraulic circuit.

Other Systems