Lance PCH
Brake fluid capacity & service interval
Lance PCH uses brake fluid with a capacity range of min to max. Service intervals occur at 1000 km or 1 months. Data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| PCH 200i, AV15W (2016- ) |
|
| PCH 125, AV12W (2013- ) |
|
| PCH 50, AE05W-A (2013- ) |
|
| PCH 50 Delivery (2013-2017) |
|
Additional Notes
- All four Lance PCH configurations listed specify brake fluid level maintenance within the min and max reservoir marks under normal use conditions, which is the standard method for hydraulic brake system fluid level verification.
- The Lance PCH 200i, AV15W (2016- ) is the only configuration among the four that carries an explicit inspection interval, set at every 1,000 km or 1 month under normal use conditions.
- The PCH 50 Delivery differs from the PCH 50, AE05W-A in that the Delivery variant has a defined production window of 2013-2017, while the AE05W-A carries a start year of 2013.
- The PCH 125, AV12W and PCH 50, AE05W-A share the same brake fluid specification structure as the PCH 50 Delivery, with level maintenance between min and max marks and no stated inspection interval in the provided data.
- A hydraulic brake system relies on incompressible fluid to transfer force from the lever or pedal to the brake caliper, making reservoir level a direct indicator of system integrity, as fluid loss can signal a leak or worn brake pads.
- The 1,000 km or 1 month interval specified for the PCH 200i, AV15W represents a relatively short check cycle, consistent with the higher displacement and likely greater braking demands of a 200cc scooter compared to the 50cc variants.