Kymco Vitality
Brake fluid capacity & service interval
Kymco Vitality uses brake fluid with a capacity range between min and max. Service intervals include change at 3000 km, 1500 km, and 24 months, as well as check at 3000 km and 1500 km. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Vitality 50 2T (2007- ) |
|
| Vitality 50 2T (2007- ) |
|
| Vitality 50 4T (2007- ) |
|
| Vitality 50 4T (2007- ) |
|
Additional Notes
- The Kymco Vitality brake fluid level specification calls for fluid to be kept between the minimum and maximum marks on the reservoir, which is a standard range-based fill method rather than a fixed volume, reflecting the nature of hydraulic brake system maintenance.
- On the Vitality 50 2T, the initial service interval for brake fluid is set at 1500 km, which is half the 3000 km interval applied under normal use conditions.
- The Vitality 50 2T specifies a full fluid change at both the 1500 km initial service and the 3000 km normal interval, meaning replacement rather than inspection alone is required at each of those points.
- The Vitality 50 4T follows a different servicing structure from the 2T variant. Under normal use, a fluid check is due at 3000 km, while a full change is tied to a time-based interval of 24 months rather than a mileage threshold.
- The 24-month change interval on the Vitality 50 4T reflects the hygroscopic nature of brake fluid, which absorbs moisture over time and degrades regardless of distance traveled, making a calendar-based replacement schedule appropriate.
- At initial service on the Vitality 50 4T, the specification calls for a fluid check at 1500 km, with no change interval listed for that service stage, distinguishing it from the 2T variant where a change is explicitly required at initial service.