Kymco UXV

Brake fluid capacity & service interval

Kymco UXV brake fluid capacity ranges between min and max. Service intervals require a change every 24 months. Data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
UXV 700i (2012- )
  • Use: Normal
  • Between min and max.
UXV 500 (2008-2011)
  • Use: Normal
  • Between min and max.
  • Change 24 months

Additional Notes

  • The Kymco UXV 500 (2008-2011) and UXV 700i starting from 2012 both use hydraulic brake systems, meaning brake fluid is pressurized through lines and calipers rather than relying on mechanical linkage.
  • For the UXV 500, the specified fill level falls between the reservoir's minimum and maximum marks, which is a standard service fill indicator rather than a measured volume capacity.
  • The UXV 700i carries the same between-minimum-and-maximum fill specification as the UXV 500, though no fluid change interval is listed for the 700i under normal use conditions.
  • Under normal use conditions, the UXV 500 carries a 24-month brake fluid change interval, which reflects the hygroscopic nature of brake fluid — meaning the fluid absorbs moisture over time and degrades braking performance regardless of mileage or hours of operation.

Other Systems