Kymco Nexxon

Brake fluid capacity & service interval

Kymco Nexxon brake fluid capacity ranges between min and max values. Service intervals include checks at 300 km and 2000 km, with a change interval of 10000 km. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Nexxon 125 (2007- )
  • Use: Normal
  • Between min and max.
  • Check 2000 km
  • Change 10000 km
Nexxon 125 (2007- )
  • Use: Initial service
  • Between min and max.
  • Check 300 km
Nexxon 50 (2007- )
  • Use: Normal
  • Between min and max.

Additional Notes

  • The Kymco Nexxon 125, introduced in 2007, carries brake fluid in a hydraulic brake system, with the correct level maintained between the minimum and maximum marks on the reservoir.
  • Under normal use conditions, the Nexxon 125 hydraulic brake system calls for a fluid level check every 2,000 km and a full fluid change every 10,000 km.
  • An initial service interval of 300 km applies to the Nexxon 125 hydraulic brake system, at which point a fluid level check is specified — no change interval is listed for initial service.
  • The Nexxon 50, also introduced in 2007, shares the hydraulic brake system configuration and the same between-min-and-max fluid level requirement, though no check or change intervals are specified for normal use on the 50 cc variant.