Kymco Maxxer
Brake fluid capacity & service interval
Kymco Maxxer brake fluid capacity ranges between min and max. Service intervals require a change every 24 months. The data covers 3 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Maxxer 450i (2010- ) |
|
| Maxxer 375 (2009- ) |
|
| Maxxer 300 (2006- ) |
|
Additional Notes
- The Kymco Maxxer brake fluid specification applies to a hydraulic brake system, meaning fluid level maintenance is tied to a sealed hydraulic circuit rather than a mechanical linkage arrangement.
- Across the Maxxer 300, 375, and 450i, the fluid level specification is expressed as a range between a minimum and maximum mark rather than a fixed volume, which is standard practice for hydraulic brake reservoirs where precise fill quantity is less critical than maintaining level within the reservoir's safe operating window.
- The Maxxer 300 carries a starting year of 2006, making it the earliest configuration represented in the brake fluid specifications among the three variants listed.
- The Maxxer 375 introduced a starting year of 2009, and the Maxxer 450i a starting year of 2010, placing both as later additions relative to the 300 within the covered 2006-2010 period.
- All three configurations share an identical change interval of 24 months under normal use conditions, meaning brake fluid replacement is time-based rather than mileage-based for the Maxxer lineup.
- A 24-month brake fluid change interval reflects the hygroscopic nature of brake fluid, which absorbs moisture over time and lowers its boiling point regardless of how many miles or hours the vehicle has accumulated.
- The normal use condition applies uniformly across the Maxxer 300, 375, and 450i brake fluid specifications, with no separate severe-use interval defined for any of the three variants.