Kymco Active
Brake fluid capacity & service interval
Kymco Active uses brake fluid with a capacity range defined by min and max levels. Service intervals include checks at 3000 km and changes at 10000 km or 12 months. The data covers 1 configuration.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Active 110 (2014-2015) |
|
Additional Notes
- The Kymco Active 110 carries a brake fluid capacity defined by the reservoir's min and max markers rather than a fixed volume, which is standard for hydraulic brake systems where the fluid level is maintained within a range rather than filled to a precise measured quantity.
- Under normal use conditions, the Active 110 (2014-2015) calls for a brake fluid level inspection every 3,000 km, a relatively short check interval that reflects the safety-critical nature of hydraulic brake fluid monitoring.
- The full brake fluid change interval for the Active 110 (2014-2015) is set at 10,000 km or 12 months, whichever comes first, meaning the calendar-based threshold can trigger a change before the distance figure is reached.
- The dual-trigger change interval of 10,000 km or 12 months applies under normal use conditions, indicating the specification accounts for time-based fluid degradation independently of mileage accumulation.