KTM 380
Clutch fluid capacity & service interval
KTM 380 uses clutch fluid with a capacity range between minimum and maximum values. The data covers 5 configurations of this model.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| 380 MXC (2002-2003) |
|
| 380 EXC (2001-2001) |
|
| 380 EXC (2000-2000) |
|
| 380 MXC (2000-2001) |
|
| 380 SX (2000-2003) |
|
Additional Notes
- The KTM 380 across all listed variants — EXC, MXC, and SX — uses a hydraulic clutch system rather than a cable-actuated one. Hydraulic clutch systems use fluid pressure to disengage the clutch, which means fluid level maintenance is part of routine service.
- The clutch fluid specification for all five configurations is expressed as a level range rather than a fixed volume: fluid must be kept between the minimum and maximum marks on the reservoir. A level-based specification is standard for hydraulic clutch reservoirs, where the correct fill is determined by sight rather than a measured quantity.
- All rows carry a normal use condition, meaning the level-based specification applies under standard operating circumstances rather than a modified interval for demanding or competitive riding environments.
- The 380 EXC appears as two separate model year entries — 2000 and 2001 — each sharing the same hydraulic clutch system note and between-min-and-max specification, indicating no change in the fluid level requirement between those years.
- The 380 MXC spans two distinct year groupings: 2000-2001 and 2002-2003. Both carry identical specifications, reflecting continuity in the hydraulic clutch fluid requirement across the full MXC production run covered here.
- The 380 SX covers the widest single-entry year range among the listed configurations, running from 2000-2003, with a consistent hydraulic clutch system and the same between-min-and-max fluid level specification throughout.