Kawasaki Z series, ZR / ZX

Clutch fluid capacity & service interval

Kawasaki Z series, ZR / ZX clutch fluid capacity is not specified. Service intervals include checks at 6000 km or 6 months and 12000 km or 12 months, with fluid changes at 24 months and 24000 km or 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Z H2 (2020- )
  • Use: Normal
  • Between min and max.
  • Check 12000 km/ 12 months
  • Change 24000 km/ 24 months
Z H2 SE (2020- )
  • Use: Normal
  • Between min and max.
  • Check 12000 km/ 12 months
  • Change 24000 km/ 24 months
Z 300, ER300AF/BF (2014-2020)
  • Use: Normal
  • Between min and max.
  • Check 6000 km/ 6 months
  • Change 24 months

Additional Notes

  • The Kawasaki Z 300 ER300AF/BF carries a clutch fluid level specification expressed as a range between minimum and maximum marks, which is the standard reservoir-based fill method rather than a measured volume, indicating a sealed hydraulic clutch system topped off by visual reference.
  • On the Z 300 ER300AF/BF, clutch fluid inspection is scheduled at every 6,000 km or 6 months under normal use conditions, whichever comes first, making the interval notably shorter in distance terms than the larger-displacement models in the same series.
  • The Z 300 ER300AF/BF specifies a clutch fluid change at 24 months under normal use, with no distance figure attached to the change interval, meaning time alone governs the replacement schedule regardless of mileage accumulated.
  • Both the Z H2 and Z H2 SE, introduced from 2020, share identical clutch fluid specifications: a level maintained between minimum and maximum marks, inspection at 12,000 km or 12 months, and a full fluid change at 24,000 km or 24 months under normal use conditions.
  • The Z H2 and Z H2 SE change interval of 24,000 km or 24 months ties a distance threshold to the replacement schedule, whereas the Z 300 ER300AF/BF change interval is governed by time only at 24 months, reflecting a structural difference in how the two service schedules are constructed.
  • The check interval for the Z H2 and Z H2 SE at 12,000 km or 12 months is double the distance and time interval specified for the Z 300 ER300AF/BF, which calls for inspection at 6,000 km or 6 months.

Other Systems