Kawasaki J300

Brake fluid capacity & service interval

Kawasaki J300 brake fluid capacity is between min and max. Service intervals include checking every 5000 km or 6 months and changing every 10000 km or 12 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
J300, SC300CH/L (2017-2021)
  • Use: Normal
  • Between min and max.
  • Check 5000 km/ 6 months
  • Change 10000 km/ 12 months
J300, SC300 AE/BE>AG/BG (2014-2016)
  • Use: Normal
  • Between min and max.
  • Change 10000 km/ 12 months

Additional Notes

  • The Kawasaki J300 brake fluid fill level is defined by a min-max range rather than a fixed volume, which is standard for hydraulic brake reservoir servicing where fluid is topped off within the sight window rather than measured by quantity.
  • The SC300 AE/BE through AG/BG variants covering 2014-2016 carry a brake fluid change interval of 10,000 km or 12 months under normal use conditions, whichever comes first.
  • The SC300CH/L configuration introduced from 2017 onward shares the same 10,000 km or 12-month change interval under normal use, but adds a separate inspection interval of 5,000 km or 6 months that was not part of the earlier variant's specification.
  • The 5,000 km or 6-month check interval on the 2017-2021 SC300CH/L means the brake fluid condition is assessed at the halfway point between each scheduled change, allowing for earlier detection of contamination or moisture absorption before the full change interval is reached.
  • Both configurations specify normal use conditions, meaning the stated intervals apply to standard operating environments rather than elevated-stress or high-frequency braking scenarios.
  • The shared 10,000 km or 12-month change interval across both configuration groups indicates consistency in the fluid replacement schedule despite the difference in inspection frequency between the two variants.

Other Systems