Italjet Dragster
Coolant capacity & service interval
Italjet Dragster coolant capacity is 1,15 liters. Service intervals include a 6000 km check and changes at 24 or 36 months. The data covers 2 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Dragster 125 (2020- ) |
|
| Dragster 200 (2020- ) |
|
Additional Notes
- The Italjet Dragster 125 and Dragster 200 share an identical cooling system capacity of 1.15 liters, which is a typical figure for small-displacement liquid-cooled single-cylinder engines in the scooter segment.
- The Dragster 125 cooling system carries a change interval of 24 months under normal use conditions, meaning the coolant is replaced on a strictly time-based schedule with no listed distance trigger.
- The Dragster 200 cooling system specifies both a check interval at 6,000 km and a change interval of 36 months under normal use conditions, giving the 200 a dual-trigger maintenance structure that the 125 specification does not include.
- The 36-month change interval on the Dragster 200 is 12 months longer than the 24-month interval on the 125, representing a notable divergence in coolant service life between the two engine variants despite identical fill volumes.
- A 1.15-liter cooling system capacity is consistent with a sealed, pressurized liquid-cooling circuit sized for a compact scooter chassis, where the radiator, hoses, and engine water jacket together account for the total system volume at a service fill level.