Hyosung SD

Brake fluid capacity & service interval

Hyosung SD uses brake fluid with a capacity range between min and max. Service intervals include checks at 1000 km and 4000 km, plus a change every 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
SD50 Sense (2005-2007)
  • Use: Normal
  • Between min and max.
  • Check 4000 km
  • Change 24 months
SD50 Sense (2005-2007)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km

Additional Notes

  • The Hyosung SD50 Sense brake fluid level is maintained between the minimum and maximum reservoir marks rather than filled to a precise measured volume, which is standard practice for hydraulic brake systems where fluid level reflects pad wear rather than a fixed capacity.
  • Under normal use conditions, the brake fluid level on the SD50 Sense (2005-2007) is checked at 4000 km intervals, giving a defined inspection cadence for the hydraulic brake system.
  • A fluid change interval of 24 months applies to the SD50 Sense under normal use conditions, meaning replacement is time-based rather than mileage-based for the hydraulic brake system.
  • An initial service check at 1000 km is specified for the SD50 Sense, which is an earlier inspection point compared to the 4000 km normal-use check interval, reflecting the break-in period for the hydraulic brake system.
  • No fluid change interval is listed under the initial service row for the SD50 Sense, as the 1000 km entry covers only a level check rather than a replacement procedure.

Other Systems