Husqvarna TC

Automatic transmission fluid capacity & service interval

Husqvarna TC automatic transmission fluid capacity is 0,2 liter. Service intervals include checks at 20 hours and changes at 10 hours or 40 hours. The data covers 6 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
TC 50 (2018- )
  • Use: Normal
  • Capacity 0,2 liter
  • Check 20 hours
  • Change 40 hours
  • Code: 1
TC 50 (2018- )
  • Use: Initial service
  • Capacity 0,2 liter
  • Change 10 hours
  • Code: 1
TC 50 Mini (2018- )
  • Use: Normal
  • Capacity 0,2 liter
  • Check 20 hours
  • Change 40 hours
  • Code: 1
TC 50 Mini (2018- )
  • Use: Initial service
  • Capacity 0,2 liter
  • Change 10 hours
  • Code: 1
TC 50 (2017-2017)
  • Use: Normal
  • Capacity 0,2 liter
  • Check 20 hours
  • Change 40 hours
  • Code: 1
TC 50 (2017-2017)
  • Use: Initial service
  • Capacity 0,2 liter
  • Change 10 hours
  • Code: 1

Additional Notes

  • The Husqvarna TC automatic transmission fluid capacity is 0.2 liter across all listed configurations, which is a notably small volume consistent with the compact gearbox units found in small-displacement youth motocross machines.
  • Under normal use conditions, the TC 50 (2017) calls for a fluid level check at 20 hours and a full fluid change at 40 hours of operation, with intervals measured in engine hours rather than distance or calendar time.
  • An initial service interval of 10 hours applies to the TC 50 (2017) under the initial service use condition, meaning the first fluid change occurs at half the interval of subsequent normal-use changes at 40 hours.
  • The TC 50 starting from 2018 carries the same 0.2-liter capacity and identical hour-based service intervals as the 2017 model, with a check at 20 hours, a change at 40 hours under normal use, and a first change at 10 hours under the initial service condition.
  • The TC 50 Mini, introduced in 2018, shares the same 0.2-liter transmission fluid capacity and the same interval structure as the TC 50, with a 20-hour check, a 40-hour change under normal use, and a 10-hour initial service change.
  • The consistent 0.2-liter figure across all rows represents a service fill value, indicating the quantity used during routine fluid changes rather than a dry-fill or overhaul capacity that would typically be higher to account for empty passages and cavities.

Other Systems