Husaberg FS
Clutch fluid capacity & service interval
Husaberg FS uses clutch fluid with a capacity range of min to max. Service intervals occur every 15 hours. The data covers 5 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| FS 650 c (2005-2008) |
|
| FS 650 e (2005-2008) |
|
| FS 650/6 (2005-2008) |
|
| FS 450 e (2004-2008) |
|
| FS 450/6 (2004-2008) |
|
Additional Notes
- All five Husaberg FS variants covered here use a hydraulic clutch system, meaning clutch engagement is controlled by fluid pressure rather than a mechanical cable.
- The clutch fluid level specification of "between min and max" refers to the reservoir's marked minimum and maximum fill lines, a standard range-based fill method used in hydraulic systems to account for fluid expansion and normal operating variation.
- A 15-hour check interval applies uniformly across all listed FS variants under normal use conditions, reflecting the maintenance demands typical of off-road competition motorcycles where fluid contamination and level changes occur more frequently than in street applications.
- The FS 450 e and FS 450/6 share identical clutch fluid specifications across the 2004-2008 model years, with no variation between the two 450 cc configurations in either fill level guidance or service interval.
- The 650 cc variants, the FS 650 c, FS 650 e, and FS 650/6, carry the same clutch fluid specifications as the 450 cc models despite the larger displacement, indicating a consistent hydraulic clutch maintenance standard across the FS lineup regardless of engine size.
- The 650 cc models enter the specification record from 2005, two years after the 450 cc models, while both groups share the same 2008 end point within the listed data.