Honda NSC Vision

Brake fluid capacity & service interval

Honda NSC Vision uses brake fluid with a capacity range of min to max. Service intervals require a change every 24 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
NSC 110 Vision (2020- )
  • Use: Normal
  • Between min and max.
  • Change 24 months
NSC 110 Vision, JF31 / JF53 (2010-2019)
  • Use: Normal
  • Between min and max.
  • Change 24 months
NSC 50 Vision, AF72 / AF73 (2010-2020)
  • Use: Normal
  • Between min and max.
  • Change 24 months

Additional Notes

  • Across all three configurations in the Honda NSC Vision brake fluid specifications, the fill level target is expressed as a range rather than a fixed volume, with the reservoir to be kept between the minimum and maximum marks on the sight gauge.
  • The NSC 110 Vision in JF31 / JF53 form, covering 2010-2019, shares the same 24-month change interval under normal use conditions as the later NSC 110 Vision variant with a 2020 start year.
  • The NSC 50 Vision in AF72 / AF73 form, spanning 2010-2020, also carries a 24-month brake fluid change interval under normal use conditions, placing all three configurations on an identical service cycle.
  • The "between min and max" fill specification applies to the hydraulic brake system reservoir, which is a sealed fluid circuit where level monitoring serves as an indirect indicator of brake pad wear or potential fluid loss rather than a routine top-up quantity.
  • A 24-month change interval for brake fluid, as specified across all NSC Vision configurations under normal use, reflects the hygroscopic nature of glycol-based brake fluids, which absorb moisture over time and lower the fluid's boiling point regardless of mileage accumulated.