Gilera Runner

Brake fluid capacity & service interval

Gilera Runner brake fluid capacity ranges between min and max values. Service intervals include checks at 1000 km, 5000 km, and 6000 km, with a fluid change required every 24 months. The data covers 12 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Runner 125 Euro 3 (2007- )
  • Use: Normal
  • Between min and max.
  • Check 6000 km
  • Change 24 months
Runner 125 Euro 3 (2007- )
  • Use: Initial service
  • Between min and max.
  • Check 1000 km
Runner 200 Euro 3 (2007-2013)
  • Use: Normal
  • Between min and max.
  • Check 6000 km
  • Change 24 months
Runner 200 Euro 3 (2007-2013)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km
Runner Purejet (2007- )
  • Use: Normal
  • Between min and max.
  • Check 5000 km
  • Change 24 months
Runner Purejet (2007- )
  • Use: Initial service
  • Between min and max.
  • Check 1000 km
Runner RST 125 (2007- )
  • Use: Normal
  • Between min and max.
  • Check 6000 km
  • Change 24 months
Runner RST 125 (2007- )
  • Use: Initial service
  • Between min and max.
  • Check 1000 km
Runner RST 200 (2007-2013)
  • Use: Normal
  • Between min and max.
  • Check 6000 km
  • Change 24 months
Runner RST 200 (2007-2013)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km
Runner RST Purejet (2007-2013)
  • Use: Normal
  • Between min and max.
  • Check 5000 km
  • Change 24 months
Runner RST Purejet (2007-2013)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km

Additional Notes

  • Brake fluid level across all Gilera Runner variants listed is specified as a reservoir level reading rather than a fixed volume, with the correct fill sitting between the minimum and maximum marks on the reservoir.
  • All variants share a 1000 km initial service brake fluid check interval, which applies during the early break-in period when hydraulic components are first settling under load.
  • Under normal use conditions, the Runner 125 Euro 3, Runner RST 125, Runner 200 Euro 3, and Runner RST 200 all specify a brake fluid check interval of 6000 km.
  • The Runner Purejet and Runner RST Purejet carry a shorter normal-use check interval of 5000 km compared to the 6000 km interval on the 125 and 200 Euro 3 variants, reflecting a difference tied to the Purejet direct-injection engine configuration.
  • A time-based fluid change interval of 24 months applies to all listed variants under normal use conditions, regardless of mileage accumulated. Brake fluid absorbs moisture over time, which lowers its boiling point, making calendar-based replacement a standard practice independent of distance.
  • The initial service interval carries only a check specification with no associated fluid change requirement, distinguishing it from the normal use schedule where both a check interval and a 24-month replacement interval are defined.
  • The Runner 200 Euro 3 and Runner RST 200 share identical brake fluid service intervals, with both specifying a 6000 km check and a 24-month change under normal use, and a 1000 km check at initial service.
  • The Runner RST Purejet covers the years 2007-2013, while the Runner Purejet without the RST designation has a starting year of 2007, and both share the same 5000 km normal check interval and 24-month change schedule.

Other Systems