Gilera GP 800 i.e.

Brake fluid capacity & service interval

Gilera GP 800 i.e. requires brake fluid with a capacity between min and max. Service intervals include checks at 1000 km and 10000 km, with a fluid change required every 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
GP 800 i.e. (2007-2013)
  • Use: Normal
  • Between min and max.
  • Check 10000 km
  • Change 24 months
GP 800 i.e. (2007-2013)
  • Use: Initial service
  • Between min and max.
  • Check 1000 km

Additional Notes

  • The Gilera GP 800 i.e. brake fluid level is maintained between the minimum and maximum reservoir marks rather than expressed as a fixed volume, which is standard practice for hydraulic brake systems where fluid is not consumed but may drop as brake pads wear.
  • Under normal use conditions, the hydraulic brake system calls for a fluid level check at every 10,000 km interval.
  • A fluid change interval of 24 months applies to the hydraulic brake system under normal use conditions, regardless of distance traveled.
  • An initial service check of the brake fluid level is specified at 1,000 km, a much shorter interval than the standard 10,000 km check, reflecting the break-in period during which brake components settle and fluid levels may shift.

Other Systems