FB Mondial Sport Classic / Pagani 1948

Coolant capacity & service interval

FB Mondial Sport Classic / Pagani 1948 requires coolant with a capacity of 0,5 liter. The service interval for the fluid is 36 months. The data covers 3 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Sport Classic / Pagani 1948 125 E5 (2021- )
  • Use: Normal
  • Capacity 0,5 liter
  • Change 36 months
Sport Classic / Pagani 1948 125 (2019-2020)
  • Use: Normal
  • Capacity 0,5 liter
  • Change 36 months
Sport Classic / Pagani 1948 300 (2019- )
  • Use: Normal
  • Capacity 0,5 liter
  • Change 36 months

Additional Notes

  • The FB Mondial Sport Classic / Pagani 1948 125 (2019-2020) carries a cooling system capacity of 0.5 liter, which is a modest figure consistent with small-displacement single-cylinder motorcycle engines where coolant volume requirements are minimal.
  • A 36-month change interval applies to the 125 (2019-2020) under normal use conditions, meaning the coolant is rated for a three-year service life in standard riding environments before a fluid exchange is due.
  • The Sport Classic / Pagani 1948 125 E5, introduced from 2021, shares the same 0.5-liter cooling system capacity and 36-month change interval as the pre-Euro 5 125 variant, indicating no change in cooling system volume between the two generations despite the updated emissions standard.
  • The 300 variant, also introduced from 2019, holds an identical 0.5-liter coolant capacity to the 125 models, which is notable given the larger engine displacement, suggesting a similarly compact cooling circuit architecture across the Sport Classic / Pagani 1948 range.
  • All three configurations share the same 36-month normal-use change interval, placing coolant renewal on a time-based schedule rather than a mileage-based one, which is a common approach for machines with lower annual usage patterns.
  • The 0.5-liter figure across all variants represents a service fill capacity, reflecting the total volume of the cooling circuit rather than a partial top-up quantity, and is the reference value used when performing a full coolant drain and refill.

Other Systems