Fantic Motor TZ
Brake fluid capacity & service interval
Fantic Motor TZ uses brake fluid with a capacity range between min and max. Service intervals require a change every 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| TZ 125 (2011-2017) |
|
| TZ 200 (2011-2017) |
|
| TZ 250 (2011-2017) |
|
| TZ 300 (2011-2017) |
|
Additional Notes
- All four Fantic Motor TZ variants covered in the 2011-2017 range share a hydraulic brake system, meaning brake fluid is pressurized through a closed circuit of master cylinders, lines, and calipers rather than relying on mechanical linkage.
- The capacity specification expressed as "between min and max" refers to the reservoir level window rather than a fixed volume fill. Brake fluid reservoirs carry visible minimum and maximum markings, and the acceptable fluid level falls anywhere within that range.
- A 24-month change interval applies to all four TZ displacement variants under normal use conditions. Brake fluid is hygroscopic, meaning it absorbs moisture from the atmosphere over time, which lowers its boiling point and degrades braking performance regardless of mileage accumulated.
- The TZ 125, TZ 200, TZ 250, and TZ 300 all carry identical brake fluid service intervals and reservoir fill specifications across the 2011-2017 model years, indicating no displacement-related variation in brake system maintenance requirements within the lineup.
- A time-based interval of 24 months rather than a distance-based one reflects the moisture absorption characteristic of brake fluid. Even low-mileage machines accumulate fluid degradation through atmospheric exposure alone, making calendar time the relevant service trigger.