E-Ton Beamer
Brake fluid capacity & service interval
E-Ton Beamer brake fluid capacity ranges between min and max values. Service intervals require a change every 24 months. The data covers 4 configurations.
The configuration chart below lists fill volumes and service intervals for each engine and trim variant.
| Type | Specifications |
|---|---|
| Beamer R4 (2008-2013) |
|
| Beamer III, PN2C (2006-2008) |
|
| Beamer II, PN2B (2004-2006) |
|
| Beamer, PN2 (2000-2004) |
|
Additional Notes
- All four E-Ton Beamer configurations use a hydraulic brake system, and fluid capacity for each is expressed as a reservoir level range rather than a fixed volume, with the correct fill sitting between the minimum and maximum marks on the reservoir.
- The original Beamer PN2 (2000-2004), the Beamer II PN2B (2004-2006), and the Beamer III PN2C (2006-2008) all share a 24-month brake fluid change interval under normal use conditions.
- A 24-month brake fluid service interval is a time-based specification rather than a mileage-based one, reflecting the hygroscopic nature of brake fluid, which absorbs moisture from the atmosphere over time and degrades braking performance regardless of distance traveled.
- The Beamer R4 (2008-2013) carries the same reservoir-level fill specification as the earlier variants but does not include a fluid change interval in the specifications, unlike the PN2, PN2B, and PN2C models.
- Across all four configurations, the use condition is listed as normal, meaning the 24-month interval where present applies to standard operating conditions rather than severe or demanding service environments.
- The progression from PN2 to PN2B to PN2C to R4 represents four distinct model designations spanning 2000-2013, yet the hydraulic brake system fill method remains consistent across all of them, always referencing the reservoir's min-to-max range rather than a measured fluid volume.