Ducati Panigale V2

Brake fluid capacity & service interval

Ducati Panigale V2 uses brake fluid with a capacity range defined between min and max. Service intervals include checks at 1000 km or 6 months and fluid changes every 24 months. The data covers 2 configurations.

The configuration chart below lists fill volumes and service intervals for each engine and trim variant.

TypeSpecifications
Panigale V2 (2020- )
  • Use: Normal
  • Between min and max.
  • Check 1000 km/ 6 months
  • Change 24 months
Panigale V2 Bayliss (2020- )
  • Use: Normal
  • Between min and max.
  • Check 1000 km/ 6 months
  • Change 24 months

Additional Notes

  • The Ducati Panigale V2 brake fluid level is maintained between the minimum and maximum marks on the reservoir, which is the standard method for hydraulic brake systems where no fixed volume is specified for a service fill.
  • A brake fluid level check is due at 1,000 km or every 6 months under normal use conditions, whichever comes first, reflecting how hydraulic brake systems can lose fluid gradually through seal wear or minor evaporation.
  • A full brake fluid change is scheduled at 24-month intervals under normal use conditions, a common interval for DOT-rated brake fluids that absorb moisture over time and lower the fluid's boiling point.
  • The Panigale V2 Bayliss (2020- ) carries identical brake fluid specifications to the standard Panigale V2, with the same level check interval of 1,000 km or 6 months and the same 24-month change interval.

Other Systems